Best & secure options of installing your rain chain to rain gutter, extension & basin

Untitled Document

Home->Installation

INSTALLATION

Rain chains can be easily installed into pre-existing rain gutters.
RainChainsWorld has a unique collection of pure copper rain chains for your home which come equipped with an adjustable triangular copper hanger for quick, easy installation. First remove your old rain gutter downspout, then slightly bend the triangular copper hanger and insert it into your existing rain gutter drain hole at a corner eave of your home or patio. Secure the bottom of the rain chain to the ground where your proper drainage is located.

Medium Cup Rain Chains	Large Cup Rain Chains	X-Large Cup Rain chains
1. Pure Copper Lily Rain Chain 2. Pure Copper Bell Cup Rain Chain 3. Pure Copper Tulip Rain Chain - 27 Cups 4. Pure Copper Tulip Green Patina Rain Chain - 27 Cups 5. Pure Copper Bamboo Rain Chain 6. Pure Copper Sundrop Rain Chain 7. Pure Copper Funnel Rain Chain 8. Pure Copper Flowerama Rain Chain 9. Pure Copper Butterfly Rain Chain	1. Pure Copper Hammered Cup Rain Chain 2. Pure Copper Umbrella Rain Chain 3. Pure Copper Mizoko Rain Chain 4. Pure Copper Lotus Rain Chain 5. Pure Copper Eastern Cup Rain Chain 6. Pure Copper Large Tulip Cup Rain Chain	1. RainchainGift1 2. RainchainGift2 3. RainchainGift3 4. RainchainGift4 5. RainchainGift5

Link Rain Chains	Rain Chain Extension	Accessories
1. X Large Pure Copper Royale Rain Chain 2. X Large Pure Copper Curl Cup Rain Chain 3. X Large Pure Copper Angel Blossom Rain Chain 4. X Large Pure Copper Florissima Rain Chain	1. Pure Copper Traditional Ring Rain Chain 2. Pure Copper Diamond Rain Chain 3. Pure Copper Ring Rain Chain 4. Pure Copper Tear Drop Rain Chain	1. Mild Steel Basin With Copper Band 2. Pure Copper Hammered Basin 3. Pure Copper Gutter Reducer 4. Pure Copper Hammered Anchoring Basin -Dia 15 inches 5. Pure Copper Hammered Anchoring Basin -Dia 18 inches

Pure Copper Hammered Anchoring Basin -Dia 18 inches Untitled Document

ASSEMBLY INSTRUCTIONS

Unpack the Copper Basin form the box. You should find the following parts:

A Copper basin
B Brass loop
C Pure copper “Connector Chain”
D Brass Nut
E Washer
a 2 nos. of Metal washer
b 2 nos. of Nylon washer

Step 1 - Unscrew the brass nut (D) from brass loop (B).

Step 2 - Insert the threaded end of brass loop (B) with washers E (a) and E (b) into copper basin hole (A) (as shown in figure 1).

Step 3 - From bottom of copper basin (A) insert other set of washer E (a) and E (b) over the threaded end of brass loop (B).

Step 4 - Screw brass nut (D) with brass loop (B) (as shown in figure 1).

Please tighten brass nut with pliers to prevent water leakage from copper basin hole. (Installation completed)

Rain Chain Assembly with Basin

Bottom connector (Clip) is included with each Rain Chain.

Step 1 - Adjust the length of connector chain (C) as per requirement.

Step 2 - Carefully twist and open link of connector chain (C) by hand or with pliers ( as shown in figure 2).

Step 3 - Slide the bottom connecter (Clip) of rain chain in open link of connector chain (C) (as shown in figure 3).

Step 4 - Close the link of connector chain (C) (as Shown in figure 3 & 4) - (Assembly completed).